A Division of Linear Devices Corporation

                    Linear Devices Corporation

                      Electromechanical Trim Tab Systems

Linear Devices Corporation
8790 Park Central Drive
Richmond, Virginia 23227

Contact us at
Phone     : 804-261-3888
Toll Free : 888-LECTROTAB or
                : 888-532-8768
Fax          : 804-264-3070

Web: http://www.lectrotab.com

                                      PRODUCTS

                                                                  TABS

                                                    Series 304 Stainless Steel

Lectrotab flat, 12 gauge, 304 stainless steel tabs, are available from stock in 9" and 12" chord lengths, (chord is the length from the transom back) and in widths of 9", 12", 18, 24, 30, 36 and 42 inches.  In quantities of 100, tabs can be supplied in any chord, any width and in 304 or 316 stainless steel.  Edges can be turned up or down, made straight or tapered and reinforced in any way.  Essentially, if you can draw it, we can probably make it.

All stainless steel tabs are fabricated with a simple but tough rolled and pinged hinge, with no welded joints.  For galvanic protection, pre-installed zinc or magnesium anodes are also available.                      

                                                Series 6005-T5 Alluminum Alloy

Lectrotab flat, 3 gauge (1/4" thick) 6005 aluminum alloy tabs are tempered to a T5 hardness and are available from stock in 9" and 12" chord lengths, (chord is the length from transom back) and in any width since the tab is cut from 9" and 12" extruded stock.  These alloy tabs cannot be bent along the edges for strength like what is frequently done with the stainless steel; however, at 3 gauge, their rigidity is sufficient in the flat form.